Condensed Mode Cooling of Ethylene Polymerization in Fluidized Bed Reactors

This review gives an overview of the evolution of the technology of condensed mode cooling, primarily for the case of ethylene polymerization on supported catalysts in fluidized bed reactors. It is well known that this mode of heat removal is quite effective in allowing polyolefin manufacturers to increase significantly production rates. What is perhaps less well understood are all of the issues that, in addition to the effect of the latent heat of vaporization of injected liquid components, also have an impact on the rate of production and behavior of the reactor. However, the liquid components injected into the reactor can vaporize rapidly under full‐scale conditions, leaving behind several heavy components (with respect to ethylene) that have numerous effects on how the particles behave, on the reaction rate, and on fluidization, fouling, and other parameters related to reactor and process performance.     

燃气透平叶片表面颗粒沉积特性数值研究进展

污染物颗粒在燃气透平叶片表面及冷却通道内的沉积将影响透平叶片的冷却特性和安全服役寿命。国外许多研究机构对燃气透平叶片表面污染物颗粒沉积特性及其与叶片气膜冷却的相互作用机制进行了持续研究。本文首次系统总结了近年来燃气透平叶片表面污染物颗粒沉积特性数值研究进展,重点介绍了燃气透平叶栅流道内污染物颗粒的沉积机制、颗粒沉积和脱离物理模型以及颗粒沉积与透平叶片冷却特性相互作用的数值模拟方法和研究成果。基于当前研究热点和发展趋势,结合作者的研究经历,指出了国内在研发先进燃气轮机透平冷却结构时应注意的问题和方向,为高效、燃料适应性更广的燃气轮机技术自主开发奠定基础。     

喷流冷却复合陶瓷薄片激光器的热特性仿真分析及实验研究

为分析喷流冷却复合陶瓷薄片激光器的热特性,设计用于冷却复合陶瓷薄片的喷流冷却系统.利用湍流换热理论和计算流体动力学仿真方法建立喷流冷却复合陶瓷薄片激光器的流固耦合热仿真模型,定义评价其冷却能力和冷却均匀性的定量参数.根据该仿真模型得到喷流冷却系统的最优设计参数,并进行实验验证.使用163孔喷板,流量为0.2kg/s,入口温度为20℃,在1200 W泵浦时获得359 W激光输出功率,并测得复合陶瓷薄片上表面的最高温度为92℃.激光输出功率与复合陶瓷薄片上表面温度均与泵浦功率呈近似正线性关系,且温度的实验值与仿真值相符度较高.     

Unravelling the Role of Water in Ultrafast Excited-State Relaxation Dynamics within Nano-Architectures of Chlorophyll a

Water plays a pivotal role in structural stability of supramolecular pigment assemblies designed for natural light harvesting (for example, chlorosome antenna complex) as well as their artificial analogs. However, the dynamic role of water in the context of excite-state relaxation has not been explored till date, which we report here. Using femtosecond transient absorption spectroscopy, we investigate the excited-state dynamics of two types of nano-scale assemblies of chlorophyll a with different structural motifs, rod-shaped and micellar assemblies, that depend on the water content. We show how water participates in excess energy dissipation by vibrational cooling of the non-thermally populated Q_y band at different rates in different types of clusters but exhibits no polar solvation dynamics. For the micelles, we observe a bifurcation of stimulated emission line shape, whereas a positive-to-negative switching of differential absorption is observed for the rods; both these observations are correlated with their specific structural aspects. Density functional theory calculations reveal two possible stable ground state geometries of dimers, accounting for the bifurcation of line shape in micelles. Thus, our study elucidates water-mediated structure–function relationship within these pigment assemblies.     

双曲冷却塔塔筒水平地震响应分析

为明确冷却塔在水平地震下的内力环向分布特征及内在原因,同时探究不同地震波时程与规范反应谱所得内力差异的原因,以某大型双曲冷却塔为例,在动力特性分析的基础上,通过反应谱方法和时程方法的水平地震响应计算及对比分析,对上述两个问题进行了研究。研究表明:由于仅侧弯振型对水平地震有贡献,而塔筒的侧弯振型和实际响应均表现为整体侧倾并伴随微弱的截面“流动”变形,这也使塔筒各内力的环向分布分别呈现正弦、余弦分布特征;其整体侧倾可类比于悬臂杆结构,塔筒子午向轴力FY、子午向弯矩MY、剪力FXY和扭矩MXY的环向分布可借助悬臂杆侧倾时截面正应力和剪应力分布来解释;而截面“流动”变形则决定了环向轴力FX和环向弯矩MX的环向分布;整体侧移显著而截面变形极小也使FY和FXY的幅值在塔筒中下部明显大于FX;由于冷却塔第1阶侧弯振型在水平地震响应中往往起绝对主导作用,因此可先对所选地震波计算得到其反应谱,对比第1阶侧弯振型周期对应的水平地震影响系数α值,即可初步推断不同时程及规范反应谱方法所得结果的大小关系。     

Ground state cooling of magnomechanical resonator in PT-symmetric cavity magnomechanical system at room temperature

We propose to realize the ground state cooling of magnomechanical resonator in a parity–time (PT)-symmetric cavity magnomechanical system composed of a loss ferromagnetic sphere and a gain microwave cavity. In the scheme, the magnomechanical resonator can be cooled close to its ground state via the magnomechanical interaction, and it is found that the cooling effect in PT-symmetric system is much higher than that in non-PT-symmetric system. Resorting to the magnetic force noise spectrum, we investigate the final mean phonon number with experimentally feasible parameters and find surprisingly that the ground state cooling of magnomechanical resonator can be directly achieved at room temperature. Furthermore, we also illustrate that the ground state cooling can be flexibly controlled via the external magnetic field.     

Multi-phase transformation kinetics of HSLA steels during continuous cooling: experiments and cellular automaton (CA) simulation

ABSTRACT

Kinetics of multiply ferrite/bainite phase transformation of HSLA steels is investigated by experiments and cellular automaton (CA) simulation. Peak-differentiation method to elucidate the sequential ferrite and bainite phase transformation individually, which is verified by the CA simulation. Such CA modelling executed using classic JMAK theory, but also gives an insight of microstructure evolution of the multi-phase transformation routine on different cooling rate. From that, it enables classic JMAK modelling to capture the detached phase transformation with different growth models and interface-migration mechanisms. Also, we find that the final phase constitution is sensitive to the cooling rate. With increasing the cooling rate, bainite sheaves nucleated at prior austenite boundaries and ferrite/austenite interfaces are significantly facilitated, which seriously inhibits the growth of prior ferrites. The scenario can be interpreted by the CA simulation and the influence of the cooling rate on sequential multi-phase transformation can be also obtained.     

Reservoir Engineering Strong Magnomechanical Entanglement via Dual-Mode Cooling

A hybrid cavity magnomechanical system to transfer the bipartite entanglements and achieve the strong microwave photon–phonon entanglement based on the reservoir engineering approach is constructed. The magnon mode is coupled to the microwave cavity mode via magnetic dipole interaction and to the phonon mode via magnetostrictive force (optomechanical-like). It is shown that the initial magnon-phonon entanglement can be transferred to the photon-phonon subspace in the case of these two interactions cooperating. In the reservoir-engineering parameter regime, the initial entanglement is directionally transferred to the photon-phonon subsystem, so a strong bipartite entanglement in which the magnon mode acts as the cold reservoir to effectively cool the Bogoliubov mode delocalized over the cavity and the mechanical deformation mode is obtained. Moreover, dual-mode cooling is realized by engineering the dissipation of photon and phonon modes within the target mode, which allows entanglement to be further enhanced. The results indicate that the steady-state entanglement is robust against temperature. The dual-mode cooling reservoir engineering scheme can potentially be extended to other three-mode quantum systems.